Transfer Switches on Wolter Power Systems


All Categories > Transfer Switches


	Transfer Switches
	Click on a category to drill down.


		ASCO Series - Transfer Switches Customer service, rock-solid dependability, and the industry’s highest performance have made ASCO the first choice in emergency power for more than 110 years. Our power transfer switches are used in more emergency power backup systems worldwide than any other. ASCO is the name behindmost of the technological advances in transfer switch design, and we have more patents than all other manufacturers combined. ASCO transfer switches are the first choice for installations of every kind, from homes and small businesses to the largest financial data centers and hospitals in the world. The SERIES 165-and every ASCO Transfer Switch- meets or exceeds the stringent requirements of UL 1008, the only UL transfer switch standard. It even says so right on the front panel. If you don’t see the UL Automatic Transfer Switch label...you’re not getting the best protection money can buy.




		GTS Series - Automatic Transfer Switches Generac is the only manufacturer of open transition switches to incorporate the two most common switching methods (inphase and delayed-transition) into the same ATS. Our inphase monitor provides safe, fast (160 msec) transfers between two live voltage sources when the source voltages are aligned (within 20Â°). If voltages are not inphase within an appropriate time, the system will automatically revert to the time delayed-transition transfer. If the inphase function is disabled, our GTS switches utilize delayed-transition transfer that allows load voltage to decay to a safe level before switching sources.




		HTS Series - Automatic Transfer Switch The Generac HTS transfer switch is a microprocessor-based design for operation in conjunction with the PowerManager® H-100 controller. HTS switches communicate via a RS485 communication link to the controller. Utility voltage and frequency are monitored by the HTS switch. Switching techniques are selectable for in-phase monitoring or delayed-transition. All timers and voltage set points are remotely programmable via GenLink® communications software.




		MTS Series - Automatic Transfer Switch The Generac MTS transfer switch is a microprocessor-based design for operation in conjunction with the Generac PowerManager® G-200 paralleling generator controller. The MTS switch has a 2 wire RS485 communication link to the system controller with a redundant 2-wire start should the communication link fail. Utility voltage is monitored by each MTS. Switching techniques are selectable for in-phase monitoring or delayed-transition. All timers and voltage set points are remotely programmable via GenLink® communications software.




		ILC Series -Integrated Load Center 200 Amps, 600 VAC Series • Service Entrance Rated with 200 Amp utility and generator circuit breakers. UL489 Listed, IEC 942-2. • A 200 amp 600 VAC open transition transfer mechanism with either a 2 or 3 pole configuration. UL 1008 Listed. • A 250 Amp rated 42-position Load Distribution Panel for site-installed breaker protection. • Transient Voltage Surge Suppression (TVSS) featuring Metal Oxide Varistor (MOV) technology. UL1449 2nd Edition Listed. • Over/under voltage/frequency protection for both utility and generator.




		RTS Series - Automatic Transfer Switch 100 - 400 Amps 600 VAC (7) Generac RTS automatic transfer switches are designed to operate with the digital control used on air-cooled generators and the Generac R100 control used on liquid-cooled QT series gaseous generators from 8 kW through 60 kW. The RTS transfer switch will operate only with the Generac R100 controller. The 100, 200 and 400 amp open transition switches are available in single and 3 phase configurations for 120/240, 120/208 and 120/240 3 phase at 100, 200 and 400 amp ratings and 277/480 at the 100 and 200 amp rating. It is available as a stand-alone switch or for single phase with a built in 8, 10, 12, 14 or 16-circuit load center to supply only those circuits that are essential during an emergency. All standard and load center ...

Transfer Switches

ASCO Series - Transfer Switches

GTS Series - Automatic Transfer Switches

HTS Series - Automatic Transfer Switch

MTS Series - Automatic Transfer Switch

ILC Series -Integrated Load Center 200 Amps, 600 VAC Series

RTS Series - Automatic Transfer Switch 100 - 400 Amps 600 VAC